Installation

PUT YOUR MOUSE POINTER ON THE VIDEO AND CLICK IT TO TURN IT OFF AND ON

figure 1 FLAT 

A – Accessory LidB – A/C Battery ChargerC – 7.4V Lithium-Ion BatteryD – TrophyShot

E – 12V Cigarette Plug Battery Charger

F – Hex head assembly tool

G – Mounting rail with rings attached

Step One

  • Remove slide rail with attached rings (G) and hex head assembly tool (F). Remove rings from slide rail.
 figure 1brail-and-rings
Step Two

  • Re-install rings to fit between your existing scope mounts. Ring mount that is towards the barrel of the gun should be in the last oval slot.
 rail
Step Three

  • Remove both bottom halves of rings.
 figure 3 figure 3b
Step Four

  • Place rail on top of scope and determine position of rear ring in reference to scope adjustment caps (the slide rail closest to the eye relief on the scope should be 2 inches away from the end of the scope.) Re-install bottom halves onto the scope and semi-tighten the screws.
figure 4
Step Five

  • Remove TrophyShot and battery from case and align battery with the docking station on the front of unit.
figure 8
Step Six

  • Position battery in one hand with unit held in opposite hand; align battery ½ inch over the open edge of docking station; push down and slide battery in place.
 figure 8b
Step Seven

  • Slide unit onto slide rail from the eye relief side of the scope; snug set screws on the bottom, right side of “Trophy Shot”; pull out camera housing and turn unit on.
figure 9 figure 9b

figure 11c

Step Eight

  • Adjust rail to parallel with scope so you align the crosshairs in the center of the screen.
figure 9c
Step Nine

  • Remove unit from top slide rail and tighten ring mounts to secure alignment of TrophyShot. Be sure to tighten all six mounting screws to ensure a stable platform.
figure 9
Step Ten

  • Adjust camera housing to desired depth (close will show a circle picture and further out will show a full screen rectangle picture) and then adjust camera lens to achieve a clear picture.
 11D

Company contact information:

Wildlife Optics, LLC

Corporate Headquarters

1508 Kline St.

Denham Springs, La 70726

1-225-445-6999

www.wildlife-optics.com

wildlifeoptics1@aol.com

<table border=”1″ width=”48%” id=”table1″><tr><td><font size=”3″>Installation instructions for &quot;Trophy Shot&quot; -&quot;Imager&quot;</font> <font size=”3″>Model number – TS2215IM-CLR-BM</font><br><img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%201%20FLAT.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”504″ height=”396″><table width=”96%” border=”0″ id=”table32″><tr><td width=”18%” height=”132″>&nbsp;</td><td width=”38%” height=”132″><b>A</b> – Accessory Lid<br><b>B</b> – A/C Battery Charger<br><b>C</b> – 7.4V Lithium-Ion Battery<br><b>D</b> – TrophyShot<br><b>E – </b>12V Cigarette Plug Battery Charger<br><b>F</b> – Hex head assembly tool<br><b>G</b> – Mounting rail with rings attached</td>

<td width=”19%” height=”132″>&nbsp;</td>

</tr>

<tr bgcolor=”#999999″>

<td colspan=”3″ align=”left” height=”3″ valign=”top”>&nbsp;</td>

</tr>

</table>

<table width=”96%” border=”0″ id=”table33″>

<tr>

<td align=”left” height=”36″ valign=”top”><b>

<font color=”#ff0000″>Step One</font></b><ul>

<li>Remove slide rail with attached rings

<font color=”#ff0000″>(G)</font> and hex head assembly tool

<font color=”#ff0000″>(F)</font>. Remove rings from slide

rail.</li>

</ul>

</td>

</tr>

</table>

<table width=”96%” border=”0″ id=”table34″>

<tr>

<td width=”95%” align=”left” height=”51″ valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%201b.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”270″ height=”270″></td>

<td width=”1%”>&nbsp;</td>

</tr>

</table>

<table width=”96%” border=”0″ id=”table35″>

<tr>

<td bgcolor=”#999999″ height=”5″>&nbsp;</td>

</tr>

</table>

<table width=”96%” border=”0″ id=”table36″>

<tr>

<td align=”left” height=”51″ valign=”top”><font color=”#ff0000″>

<b>Step Two</b></font><ul>

<li>Re-install rings to fit between your existing scope

mounts. Ring mount that is towards the barrel of the gun

should be in the last oval slot.</li>

</ul>

</td>

</tr>

</table>

<table width=”50%” border=”0″ id=”table37″>

<tr>

<td width=”39%” align=”left” height=”51″ valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%202c.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”233″ height=”236″></td>

<td align=”right” height=”51″ valign=”middle”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%202b.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”265″ height=”46″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table38″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<table width=”96%” border=”0″ id=”table39″>

<tr>

<td align=”left” height=”32″ valign=”top”><b>

<font color=”#ff0000″>Step Three</font></b><ul>

<li>Remove both bottom halves of rings.</li>

</ul>

</td>

</tr>

</table>

<table width=”96%” border=”0″ id=”table40″>

<tr>

<td width=”38%” align=”left” height=”51″ valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%203.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”263″ height=”198″></td>

<td width=”54%” align=”right” height=”51″ valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%203b.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”225″ height=”270″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table41″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table42″>

<tr>

<td align=”left” height=”79″ valign=”top”><font color=”#ff0000″>

<b>Step Four</b></font><ul>

<li>Place rail on top of scope and determine position of

rear ring in reference to scope adjustment caps (the slide

rail closest to the eye relief on the scope should be 2

inches away from the end of the scope.) Re-install bottom

halves onto the scope and semi-tighten the screws.</li>

</ul>

</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table43″>

<tr>

<td align=”center” valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%204.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”270″ height=”203″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table44″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table45″>

<tr>

<td align=”left” height=”49″ valign=”top”><font color=”#ff0000″>

<b>Step Five</b></font><ul>

<li>Remove TrophyShot and battery from case and align

battery with the docking station on the front of unit.</li>

</ul>

</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table46″>

<tr>

<td align=”center” valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%208.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”360″ height=”158″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table47″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table48″>

<tr>

<td align=”left” height=”71″ valign=”top”><font color=”#000000″>

<b><font color=”#ff0000″>Step Six</font></b></font><ul>

<li>Position battery in one hand with unit held in opposite

hand; align battery ½ inch over the open edge of docking

station; push down and slide battery in place.</li>

</ul>

</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table49″>

<tr>

<td align=”center” valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%208b.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”324″ height=”192″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table50″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table51″>

<tr>

<td align=”left” valign=”top”><font color=”#ff0000″><b>Step

Seven</b></font><ul>

<li>Slide unit onto slide rail from the eye relief side of

the scope; snug set screws on the bottom, right side of

&quot;Trophy Shot&quot;; pull out camera housing and turn unit on.</li>

</ul>

</td>

</tr>

</table>

<table width=”96%” border=”0″ height=”154″ id=”table52″>

<tr>

<td width=”32%” align=”left” valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%209.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”161″ height=”122″></td>

<td width=”33%” align=”center” valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%209b.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”162″ height=”122″></td>

<td width=”28%” align=”right” valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%2011.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”143″ height=”137″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table53″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table54″>

<tr>

<td align=”left” height=”37″ valign=”top”><font color=”#ff0000″>

<b>Step Eight</b></font><ul>

<li>Adjust rail to parallel with scope so you align the

crosshairs in the center of the screen.</li>

</ul>

</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table55″>

<tr>

<td align=”center” valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/figure%2011c.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”270″ height=”270″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table56″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table57″>

<tr>

<td align=”left” height=”58″ valign=”top”>&nbsp;<p><b>

<font color=”#ff0000″>Step Nine</font></b></p>

<ul>

<li>Remove unit from top slide rail and tighten ring mounts

to secure alignment of TrophyShot. Be sure to tighten all

six mounting screws to ensure a stable platform.</li>

</ul>

</td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table58″>

<tr>

<td align=”center” height=”170″ valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/Picture%20046.jpg” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”352″ height=”254″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table59″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<table width=”96%” border=”0″ id=”table60″>

<tr>

<td align=”left” height=”55″ valign=”top”><font color=”#000000″>

<b>Step Ten</b></font><ul>

<li>Adjust camera housing to desired depth (close will show

a circle picture and further out will show a full screen

rectangle picture) and then adjust camera lens to achieve a

clear picture.</li>

</ul>

</td>

</tr>

</table>

<table width=”96%” border=”0″ id=”table61″>

<tr>

<td align=”center” height=”108″ valign=”top”>

<img src=”file:///C:/Users/Dale%20Ficken/Desktop/public_html/images/instruct/11D.JPG” alt=”trophyshot wildlife optics entire package kit hardcase battery a/c charger d/c rings mounting rail foam mounting tool allen wrench wildlife photo trophy shot shotgun hunting rifle pistol handgun” width=”220″ height=”223″></td>

</tr>

</table>

<table width=”97%” border=”0″ id=”table62″>

<tr>

<td bgcolor=”#999999″>&nbsp;</td>

</tr>

</table>

<p><b>Company contact information:</b></p>

<p>Wildlife Optics, LLC<br>

Corporate Headquarters<br>

P.O. Box 802<br>

Denham Springs, La 70727-0802<br>

1-866-664-4028<br>

www.wildlifeoptics.com</p>

<p>&nbsp;</td>

</tr>

</table>

Comments are closed.